Barco SIM 5W - The Female Jack on the Lens (A) Must be in Front of the Male Jack (B) Located in the Upper-Left Part of the Housing in; The Projector; In Case of a Scheimpflug Lens, Insert the Lens with the Adjustment Bolts Located in the Left and Bottom Position

4. Installation
Caution: In cas e of a motorized lens the female jack on the lens (A) mus t be in front of the male jack (B) located in the upper-left
part of the housing in the projector.
Image 4-5
The fem ale jack on the lens (A) must be in front of the male jack (B) located in the upper-left part of the housing in the projector.
Note: In c ase of a Scheimpflug lens, insert the lens with the adjustment bolts located in the left and bottom pos ition.
Image 4-6
In case of a Scheimpflug lens, insert the lens with the adjustment bolts located in the left and bottom position.
A Scheimpflug lens will limit shift possibilities. Mount the lens depending on the application (adjustment bolts
located in the left and bottom position to allow maximum shift up and in the left/top position to allow maximum
shift down)
CAUTION: The projector is delivered by default with a 100% upward shifted position. To mount the
Scheimpflug lens, first shift down.
R59770324 SIM 5W 22/12/2011 19
Downloaded From projector-manual.com Barco Manuals