7. Advanced
5. Press ENTER
A dialog box is displayed.
Image 7-207
6. Use the arrow keys, the numeric keys on the remote, or the keypad to change the Sync variance limit
7.10 Installation
Not all the menu items of the Installation menu are handled in this chapter. The other items are treated in the
Installation, or Setup chapter.
7.10.1 EDID
What can be done?
The choice can be made between two EDID files:
• Default:thisfile contains all off the possible resolutions that can be handled by this projector
• Native:thisfile only contains the native resolution of the projector
The latter forces the IG to switch to this native resolution.
HowtoswitchtoaspecificEDIDfile?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation menu
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select EDID
5. Press → to pull down the EDID menu
6. Use ↑ or ↓ to select the desired EDID file
Image 7-208
7. Press ENTER
The active selection is indicated by a w
hite bullet
166
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
