7. Advanced
Image 7-172
Soft edge : points numbering, Top and bottom side edges
Image 7-173
Soft edge : points numbering, left and right side edges
Levels
The soft edge adjustment is divided in 6 levels.
Each level represents a group of points and interacts with other levels, adjusting a point on a certain level will affect points in the
levels underneath.
The level of the adjustment gives a measure of this impact. A level 1 adjustment happens on the 4 corners of the soft edge zone
and will thus affect the whole zone whereas a level 6 will only affect the adjusted point (called local points). The image below shows
the levels in the left side soft edge zone.
R59770324 SIM 5W 22/12/2011
147
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
