4. Installation
Image 4-24
5. Push the cursor key ↑ or ↓ to highlight the desired parameter.
6. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the values.
7. Press Apply settings to apply the changes
A dialog box is shown. The different executed operations are shown with a checkbox. The last operation Restarting ne twork
takes a few seconds more.
Image 4-25
4.9.9.3 Serial connection
Serial connection
To establish a serial communication with the projector, a RJ12 connector is available.
34
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
