4. Installation
Gateway Gateway (This is a non-adjustable value)
DHCP
DHCP setting:
• Yes: The projector will dynamically obtain its IP address from the DHCP server.
• No: The IP address needs to be entered manually. Note that when selecting Fixed IP
the IP settings fields are enabled
IP Address
Fixed IP Address of the projector : this field can be edited when Fixed IP is selected
Subnet Mask Subnet Mask : this field can be edited when Fixed IP is selected
Gateway Gateway : this field can be edited when Fixed IP is selected
Hostname
Hostname : this field can be edited when DHCP is selected
How to set up the network settings ?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Installation in the menu bar.
3. Push the ↓ keytopulldowntheInstallation menu.
4. Push the cursor key ↑ or ↓ to highlight Network settings and press ENTER to select.
Image 4-23
A dialog box will be displayed.
R59770324 SIM 5W 22/12/2011
33
Downloaded From projector-manual.com Barco Manuals
To Next Page
Loading...
