Barco SIM 5W - Page 127

7. Advanced
Image 7-132
The CCD Limit dialog box will be displayed.
Image 7-133
9. Use the cursor keys ← or → , the numeric keys on the RCU, or the local keypad, to set the CCD limit to the desired value.
Note: Range: 0.0 to 100.0 (i.e. %)
10.Press ENTER to activate the new CCD limit settings.
11. Press BACK to return to the Lamps menu.
How to set the ECR limits?
1. Press the MENU key to activate the Menu bar
2. Push the cursor key ← or → to highlight Lamps in the menubar
3. Push the ↓ key to pull down the Lamps menu
4. Push the cursor key ↑ or ↓ to highlight Dimming Control
5. Push the → key to pull down the Dimming Control menu
6. Push the cursor key ↑ or ↓ to highlight Limits
7. Push the → key to pull down the Limits menu
8. Push the cursor key ↑ or ↓ to select ECR... and press ENTER to select.
Image 7-134
The ECR Limit dialog box will be displayed.
Image 7-135
R59770324 SIM 5W 22/12/2011 123
Downloaded From projector-manual.com Barco Manuals