7. Advanced
Blue x, y
Coordinates for the blue point
Blue L Blue light output
White x, y
Coordinates for the white point
White L White light output = red + blue + green light output
White+ (full-on) x, y Coordinates for the white point in case of full use of the color wheel
White+ (full-on) L White+ light output = full use of the entire color wheel
Brill Color 1 x, y Coordinates for the color of an extra segment in the color wheel (e.g. white)
Brill Color 1 L Light output for the color of this specific color wheel segment
Brill Color 2 x, y Coordinates for the color of an extra segment in the color wheel (e.g. white)
Brill Color 2 L Light output for the color of this specific color wheel segment
In case of an RGBRGB color wheel, both Brill Color 1 and 2 will show black.
In case of an RGWB color wheel (extra segment is white), Brill Color 1 will show white and Brill Color 2 will
show black.
Desired Values These are the colors displayed when the status is enabled
Red x, y Coordinates for the red point
Red L Red light output
Red Lmax Maximum available red light output
Green x, y Coordinates for the green point
Green L Green light output
Green Lmax Maximum available green light output
Blue x, y Coordinates for the blue point
Blue L Blue light output
Blue Lmax Maximum available blue light output
Cyan x, y Coordinates for the cyan point
Cyan L Cyan light output
Cyan Lmax Maximum available cyan light output
Yellow x, y Coordinates for the yellow point
Yellow L Yellow light output
Yellow Lmax Maximum available yellow light output
Magenta x, y Coordinates for the magenta point
Magenta L Magenta light output
Magenta Lmax Maximum available magenta light output
White x, y Coordinates for the white point
White L White light output
White Lmax Maximum available white light output
Save to file Changes to measured and/or desired values are saved
Reload from file Recall of the values that were saved last
Default desired This will result in the calculation of the desired values out of the measured values, depending
on the Brilliant Color mode setting
136 R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals