Barco SIM 5W - Page 148

7. Advanced
• RGWB color wheel: 4 levels
- 0: only primary colors are used to generate the colors
- 1, 2: limited use of secondary colors
- 3: full use of the color wheel, which includes secondary colors
• RGBRGB color wheel (default): 2 levels
- 0: only primary colors are used to generate the colors
- 1: full use of the color wheel, which includes secondary colors
If multiple projectors are linked for DynaColor, the Brilliant Color mode will be forced from the master to the
slave projectors as well.
How to activate the Brillant Color
TM
mode ?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight D isplay setup in the menu bar.
3. Push the ↓ key to pull down the Dis play setup menu.
4. Push the cursor key ↑ or ↓ to highlight Brilliant Color mode and press ENTER to select.
Image 7-166
A slider box is displayed.
5. Put the slider box on the desired value
Image 7-167
Image 7-168
144 R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals