Belarus 820 - Page 7

80-0000010B OM
7
3.16.2.1 Buckles...……….…….………………………………………………………………. 181
3.16.2.1.1 General information……………….………………………………………………. 181
3.16.2.1.2 Telescopic buckles ……………………………………………………………….. 181
3.16.2.1.3 External turnbuckles………………………………………………………………. 183
3.16.2.1.4 Internal buckles……….…………………………………………………………… 184
3.16.2.2 Lifting rod….………………………………………………………………………….. 185
3.16.2.3 Upper link……..…………………………………………………………………….... 186
3.16.2.4 Lower links…….………………………………………………………………………187
3.16.2.4.1 General information……………………………………………………………….. 187
3.16.2.4.2 Installation in working position of crossba
r
and rea
r
ends of detachable
lower links ………………………….…………………………………………………………... 187
3.16.2.4.3 Telescopic lowe
r
links and double cross bar……………..……………………. 188
3.16.3 Mounting of implements on a tractor..………………………………………………..189
3.17 Tow hitches…..…………………………………….…………………………………….. 190
3.17.1 General information……………………………………………………………………. 190
3.17.2 Tow hitch TSU-2 (hydraulic hook) and combined device TSU-2M-02 (with hy-
draulic hook set in the working position and pendulum, set in the additional position)… 191
3.17.3 Combined device ТSU-1М-02 (combined device with pendulum set in the wo
r
k-
ing position hydraulic hook set in the additional position)…...…………………………….. 192
3.17.4 Tow hitch TSU-1M (pendulum)……………………………………………………..... 192
3.17.5 Lowering link……….…………………………………………………………………... 192
3.17.6 Basic parameters and coupling dimensions of TSU-1M-02 (combined device
with pendulum in working position), TSU-1M (pendulum) and of lowering link ………… 193
3.17.7 Tow hitch TSU-1Zh (cross ba
r
)………………………………………………………. 194
3.17.8 Tow hitch TSU-1Zh-01 (double cross ba
r
)………………………………………….. 194
3.17.9 Resetting of pendulum and hydraulic hook in a combined device…………..…… 195
3.17.10 Tow hitch TSU-2 (autonomous hydraulic hook)…………………………………... 199
3.18 Electrical equipment…..…………………………………………………………………. 200
3.18.1 General information………………………………………………………………….... 200
3.18.2 Operation principle of heating plugs pilot indicato
r
-lamp ..................................... 200
3.18.3 Programming procedure fo
r
tachospeedomete
r
of instrument board with cast
panel…………………………………………………………………………………………….. 201
3.18.3.1 Tachospeedometer control panel………..……………….……………….………. 201
3.18.3.2 Programming orde
r
of electric tachospeedomete
r
A
P70 3813……………………… 201
3.18.3.3 Programming procedure for integrated indicator unit КД8083…………...…….. 202
3.18.4 Programming procedure fo
r
tachospeedomete
r
of instrument board with mold-
ed panel……........………………………………………..………………...…………...……... 204
3.18.4.1 Tachospeedomete
r
control panel………………….…………………………….... 204
3.18.4.2 Tachospeedometer programming procedure ...………………………………….. 204
3.18.5 Installation and adjustment of speed sensors………………………………………. 206
3.19 Cabin...…………………………………………………………………..…………….......207
3.19.1 General information…………………….……………………………………………… 207
3.19.2 Mounting and dismounting of complete cabin………..………..…………………… 207
3.19.3 External mirrors……………………………………………………………..…………. 208
3.19.4 Mounting and dismounting of canopy frame (canopy base) on the basis of uni-
versal cabin…………………………………....................................................................... 208
3.19.5 Mounting of canopy on the base (on the basis of universal cabin)………….…… 209
3.19.6 Mounting and dismounting of canopy frame (canopy base) on the basis o
f
small cabin……………………………………………………………………………………… 210
3.19.7 Mounting of canopy on the base (on the basis of a small cabin) ……………….. 211
3.20 Front wheel fenders with turning mechanism……………………………..………….. 212
3.20.1 General information………………………………………………………………….... 212
3.20.2
A
djustment of front wheel fenders with turning mechanism ………. ……………. 212
3.21 Markin
g
of tractor components…………….…………………………………………… 213