80-0000010B OM
208
3.19.3 External mirrors
To adjust visible areas in external mirrors 1 (figure 3.19.3), turn bracket 2 in horizon-
tal plane, and turn mirror 1 around its support in vertical and horizontal planes.
1 – external mirrors; 2 – bracket.
Figure 3.19.3 – Adjustment of external mirror position
3.19.4 Mounting and dismounting of canopy frame (canopy base) on the basis of
universal cabin.
Canopy frame (canopy base), just like complete cab, is mounted on tractor frame-
work through vibration absorbers 4 (figure 3.19.1).
When dismounting the canopy frame (canopy base) make sure to:
- remove split pins 1;
- undo nuts 2;
- remove bolts 3;
- remove the canopy frame with an overhead crane with a load capacity of at least
1000 kg, using two eyes 1 (figure 3.19.4) welded onto upper longitudinal beams 2 of the
canopy frame to secure the chains (wires) (if canopy base is installed, use the places indi-
cated in figure 3.19.5 with arrows, to secure the chains (wires)).
1 – eye; 2 – upper longitudinal beam.
Figure 3.19.4 – Rigging of canopy frame
1, 2 – Rigging points.
Figure 3.19.5 – Rigging of canopy base
To Next Page
Loading...
