Functions in the BSR mode
Needle stop down (standard)
►
the arrow points down on «BSR»-Display
►
the sewing computer stops with needle down, when taking foot off foot
control or when «Start/Stop»-button is pressed
Needle stop up
⦁
touch the «Needle stop»-icon in the Display
►
the arrow points up
►
the sewing computer stops with needle up, when taking foot off foot control
or when «Start/Stop»-button is pressed
Raising or lowering the needle
⦁
press «Needle stop»-button
►
to raise or to lower the needle
Securing with «Start/Stop»-button (only Mode 1)
⦁
place the fabric under the presser foot
⦁
lower the presser foot
⦁
press «Needle stop»-button twice
►
the lower thread is brought up
⦁
hold upper and lower thread
⦁
press «Start/Stop»-button
►
BSR mode starts
⦁
sew 5-6 securing stitches
⦁
press «Start/Stop»-button
►
BSR mode is stopped
⦁
cut threads
⦁
press «Start/Stop»-button
►
BSR mode starts
⦁
continue the stitching process
Securing function (only Mode 2)
⦁
press «Securing function»-button
⦁
press either the foot control or «Start/Stop»-button
By moving the fabric short securing stitches are sewn, then the set stitch length
will be activated and the securing function will be automatically deactivated.
Free motion quilting (only Mode 2)
►
BSR mode is activated
⦁
freemotion quilting can be sewn
⦁
by touching the securing function button is pressed during free hand
quilting, a short securing stitch sequence is sewn and
►
the sewing computer stops
►
BSR mode is deactivated
Free motion quilting without BSR activation
⦁
touch the «BSR»-icon
⦁
BSR mode is deactivated
Normal freemotion quilting can now be sewn with the BSR foot, without
automatic regular stitch length.
To Next Page
