Accessory box free standing
⦁
on the back of the box, pull both extensions out until they click into place
Lay-out
The box is equipped as standard with one large 1 and one small 2 drawer as
well as a compartment for bobbin holders 5 and presser feet 7.
⦁
to remove a bobbin, press the compartment holder 6 lightly
⦁
buttonhole foot with slide No. 3A can be stored in the left compartment 4
⦁
store the needle package in the special compartment 3
2
1
5
7
6
4
3
Bobbin
The bobbin of the B 880, exclusive to BERNINA, supplies up to 40% more
lower thread. If the bobbin is not inserted correctly, an error message is
displayed.
You can preselect a bobbin fill of 25%, 50% or 100%.
ATTENTION!
Treat the bobbins with care. Keep the white sensor surfaces
free of scratches or stains to ensure correct functioning of the
lower thread indicator. Store the bobbins in the respective
compartment of the accessories box.
Storage example
To Next Page
Loading...
