►
the embroidery menu opens
►
the motif is ready for embroidering
⦁
press the «Start/Stop/hover»-button, until the embroidery computer starts
►
the embroidery computer sews approximately 7 stitches and stops
automatically
►
a Display indicates that the thread tail has to be cut at the beginning of the
motif
⦁
raise the presser foot
⦁
cut the thread tail at the beginning of embroidering
⦁
press the «Start/Stop/hover»-button and resume embroidering
Interrupting the process
⦁
press the «Start/Stop/hover»-button
►
the embroidery computer stops
Completing the color
⦁
press the «Start/Stop/hover»-button
►
the embroidery computer embroiders all the sections in the color activated
►
the embroidery computer stops automatically when complete
►
both threads are automatically cut
Color change
►
the emboidery computer switches automatically to the next color
⦁
change color of the upper thread accordingly
⦁
embroider with the new color
Embroidery menu
Embroidering using the «Start/Stop/hover»-button
«Embroidery»-Display
►
after starting the motif the «Embroidery»-Display appears
Embroidery speed
To guarantee the best embroidery quality the speed when embroidering is
reduced according to the embroidery position. You have the options to choose
from optimal and maximum speed. Standard = optimal.
⦁
touch the «Embroidery speed»-icon
►
the maximum embroidery speed-mode is activated
Please note that the quality of the embroidered motif may not be optimal at
maximum speed.
⦁
by touching the «Embroidery speed»-icon again or by switching off or on
the embroidery computer, the optimum embroidery speed is activated again
To Next Page
Loading...
