Bernina 880 - Sewing Settings; Altering Upper Thread Tension; Sewing Speed Control; Securing Stitches at Pattern Begin

53
Setup-Program
1
2
1
3
5
2
4
1 Altering Upper thread tension
2 Sewing speed control
3 Securing stitches at pattern begin
4 Programming «Function»-buttons/«Function»-icon
5 Programming the foot control
Sewing settings
⦁
touch the «Sewing setting»-icon
Altering Upper thread tension
⦁
touch the «Thread tension»-icon
⦁
move the slider in the Display to the left/right using the Touchscreen pen or
the finger or
⦁
turn the stitch width or the stitch length knob or
⦁
touch the «+»/«-»-icon
►
alters the basic setting of the upper thread tension 1 at plus or minus two
basic values
►
0.0 = basic setting
Sewing speed control
⦁
touch the «Sewing speed control»-icon
⦁
move the slider in the Display to the left/right using the Touchscreen pen or
the finger or
⦁
turn the stitch width or the stitch length knob or
⦁
touch the «+»/«-»-icon
►
alters the maximal sewing speed 2
►
the number in the yellow-framed icon indicates the stitches per minute, the
basic value is displayed by a small white dot
Securing stitches at pattern begin
►
the function is active (standard)
►
before sewing the stitch pattern, 4 securing stitches are sewn first
⦁
touch gray icon
►
function is inactive = no securing stitches will be sewn
034791.51.04_2014-02_Manual_B880_EN