!
Biodex Medical Systems, Inc. © 2016 175
The View Decay Test data screen displays the decay tests performed on the dose calibrator. The
data is stored for each detector connected to the system.
The display shows individual decay tests with the most recent test as the default. Use <Earlier
Date> and <Later Date> to scroll to view the test results desired. Any test or reading outside the
acceptable variance is shown in red. You can view the decay plot for the test being shown on
the display.
• Touch <Back> to return to the Linearity Testing screen.
• Touch <Select Detector>to select a different detector, if multiple detectors are connected.
• Touch <Print> to print the linearity decay test currently displayed on the screen.
• Touch <Earlier Date> and <Later Date> to scroll to view the tests desired.
To Delete Data:
1. Touch <Delete Data> and use the keypad to enter your password. Touch <Enter> to
advance to the decay Test data screen.
2. Touch <Delete Data> to delete the test currently on the screen. The delete data
Confirmation screen is displayed. Touch <OK> to delete and return to the Decay Test data
screen. Touch <Cancel> to return to the Linearity Testing screen.
To View Activity Plots:
1. Touch <View Activity Plots> to advance to the Linearity Decay Plots screen. A plot of the
displayed linearity test will be shown.
2. Use <Earlier Date> and <Later Date> to toggle between dates.
3. Touch <Print> to print the linearity plot displayed.
4. If desired, touch <Select Detector> to select and view the decay tests if multiple detectors are
connected.
5. Touch <Back> to return to the decay Test data screen.
6. Touch <Earlier Date> and <Later Date> to plot the other linearity tests stored in memory.
7. Touch <Print> to print the linearity plot display.
To Next Page
Loading...
