biodex ATOMLAB 500 - Conformance to Standards

!
Biodex Medical Systems, Inc. © 2016 227
APPENDIX H:
Conformance To Standards
This equipment conforms to the following safety standards:
Standard Edition and/or date
IEC60601-1-2 First edition, 2007
Table 1.1. Safety Standards.
Accompanying EMC Documents
This medical electrical equipment needs special precautions regarding EMC and needs to be
installed and put into service according to the EMC information provided in this manual.
• Portable and mobile RF communications equipment can affect medical electrical equipment.
• Use of accessories, transducers and cables other than those specified, with the exception of
accessories, transducers and cables sold by the manufacturer of this equipment, as
replacement parts for internal and external components, may result in increased emissions
or decreased immunity of the equipment.
• The AL 500 should not be used adjacent to or stacked with other equipment. If the AL 500
is used while positioned adjacent to other equipment, it should be observed to verify
normal operation in the configuration in which it will be used.
List Of Cable Accessories
The list in Table 1.2 includes all accessory cables supplied with the AL 500 for which the
manufacturer of this equipment claims compliance to EN 60601-1-2 when used with the AL 500.
Cable description Part no. Cable length
Power Input Wall Pack Biodex # C13116 6ft
NEMA Cord Set Biodex # C11789 10ft
Table 1.2. AL 500 cables.