biodex ATOMLAB 500 - Calicheck Test Data

!
188 ATOMLAB 500 DOSE CALIBRATOR
Calicheck Test Data
(See Figure 6.56.)
Figure 6.56. The Calicheck Test data screen.
The Calicheck Test data screen displays the Calicheck Linearity Tests performed on the dose
calibrator. The data is stored for each detector connected to the system.
• Touch <Back> to return to the QA Dose Calibrator screen.
• Touch <Select Detector>to select a different detector, if multiple detectors are connected.
• Touch <Earlier Date> and <Later Date> to scroll to view the tests desired.
• Touch <Print> to print the Calicheck linearity test report shown on the screen.
To Delete Data:
1. Touch <Delete Data> and use the keypad to enter your password. Touch <Enter> to advance
to the Calicheck Test data screen.
2. Use <Earlier Date> and <Later Date> to scroll to the test you wish to delete.
3. Touch <Delete Data> to delete the test shown on the screen. The Delete Data Confirmation
screen is displayed. Touch <OK> to delete and return to the Calicheck Test data screen.
4. Touch <Cancel> to return to the Calicheck Test Data screen.