!
Biodex Medical Systems, Inc. © 2016 45
Activity Units
Accessed from the Dose Calibrator Configuration screen, this option is used to change from the
default Activity Units (curies). To change to Becquerels, touch the Activity Units value current
setting and then touch your selection from the pop-up list. Touch any part of the screen while the
pop-up list is displayed to cancel without making any changes.
Time Format
The Time Format option allows the user to select from a 24-hour clock or a.m./p./m. clock
format. Simply touch the <Time Format> value to make the change. Touch <Back> to return to
the Utilities menu.
Screen Saver (Mins)
The display screen can be set to stay on continuously, or to turn OFF after 5, 10, 20 or 30-
minute intervals. Allowing the screen to turn OFF does not turn the system OFF - it turns OFF
only the display screen.
To Change Screen Saver Time:
1. Touch the <Screen Saver> value to view a listing of settings.
2. Touch the desired setting to select. The system returns to the System Configuration screen
with new selected setting.
NOTE: If the screen turns OFF at any time, touch the screen to reactivate the display.
LCD Brightness
The display’s LCD brightness can be set from 1 (least bright) to 10 (brightest.) Touch the
desired value on the LCD brightness scale to set.
Tone Volume
The system volume can be from 1 (lowest) to 10 (loudest) touch the desired value on the tone
scale to set.
• Touch <Home> to return to the Home screen.
• Touch <Back> to return to the Utilities screen.
• Touch <Measure> to return to the <Count> screen.
To Next Page
Loading...
