biodex ATOMLAB 500 - View Lineator Data

!
180 ATOMLAB 500 DOSE CALIBRATOR
View Lineator Data
(See Figures 6.50 - 6.51.)
Figure 6.50. The Lineator Test data screen.
The Lineator Test data screen displays the Linearity Tests performed on the dose calibrator.
The data is stored for each detector connected to the system.
• Touch <Back> to return to the QA Dose Calibrator screen.
• Touch <Select Detector>to select a different detector, if multiple detectors are connected.
• Touch <Earlier Date> and <Later Date> to scroll to view the tests desired.
• Touch <Print> to print the linearity test report shown on the screen.
To Delete Data:
1. Touch <Delete Data> and use the keypad to enter your password. Touch <Enter> to advance
to the Lineator Test data screen.
2. Use <Earlier Date> and <Later Date> to scroll to the test you wish to delete.
3. Touch <Delete Data> to delete the test shown on the screen. The Delete Data Confirmation
screen is displayed. Touch <OK> to delete and return to the Lineator Test data screen.
4. Touch <Cancel> to return to the Lineator Test data screen.