!
Biodex Medical Systems, Inc. © 2016 53
To Remove Isotopes From The Routine List:
1. From the Isotope List screen, touch <Setup Routine Isotopes>. The Setup Routine Isotopes
screen is displayed.
2. Use the <▲> or <▼> keys to scroll through the Routine Isotope List until the isotope to
remove is displayed.
3. Press the isotope name to highlight it. If you press the isotope name again the highlight
turns OFF. The highlighted isotope is the only isotope that will be changed.
4. Touch <Remove From Routine List>. The highlighted isotope is removed from the list.
5. Touch <Enter> to save the updated Routine Isotope List, or <Cancel> to return to the Setup
Routine Isotopes screen without making changes.
NOTE: If you make changes and press <Cancel>, a “Modifications have been made, are you
sure you want to lose the changes?” prompt is displayed. Press <No> to keep the changes,
followed by <Enter> on the Setup Routine Isotope screen. Press <Yes> if you do not want to make
the changes and the system returns to the Isotope List screen.
To Restore Factory Isotope Settings:
1. From the Isotope List screen, touch <Setup Routine Isotopes>. The Setup Routine Isotopes
screen is displayed.
2. Touch <Restore Factory settings> and touch <Yes> to revert to the factory defaults, or <No>
to return to the Setup Routine Isotopes screen without making changes.
To Next Page
Loading...
