Biolight Meditech P1 - TEMP Default Settings

P1 Patient Monitor User’s Manual
40
Item Default Setting
Low limit
85％
Alarm priority HIGH
Alarm print OFF
NIBP Simul OFF
Sensitivity MED
Display PI ON
Waveform Speed 25 mm/s
PR Alarm switch ON
High limit Adult: 120 bpm
Pediatric: 160 bpm
Neonatal: 200 bpm
Low limit Adult: 50 bpm
Pediatric: 75 bpm
Neonatal: 100 bpm
Alarm priority MED
Alarm print OFF
Alarm source HR
PR source Auto
QRS volume 3
Pitch Tone ON
C.4 TEMP Default Settings
Item Default Setting
T1, T2 Alarm switch ON
High limit 38.0 ºC
Low limit 36.0 ºC
Alarm priority MED
Alarm print OFF
T Alarm switch ON
High limit 2.0 ºC