Biolight Meditech P1 - Appendix E Cybersecurity; Operating Environment; Network Data Interface; User Access Control Mechanism

P1 Patient Monitor User’s Manual
60
Appendix E Cybersecurity
This chapter mainly describes the information related to cybersecurity of the
monitor.
E.1 Operating environment
 Hardware environment
 Monitor software is only applicable to P1 patient monitor hardware
platform.
 Screen: 5.5LCD screens with resolution 720*1280.
 Peripherals: nurse call module.
 Software environment
 Main board: P1MB
 Operating system: LinuxLinux-3.2.0 kernel + Busybox filesystem.
 Database: sqlite-3.16.2
 Network environment
 Apply to LAN
E.2 Network data interface
The communication interface between the monitor and the CMS is wired or wireless
Ethernet, using the standard TCP/IP protocol family, and the application layer data format
follows the Central Monitoring System Network Communication Protocol during
transmission.
E.3 User access control mechanism
a） User identification method: after entering the authorization password, you
have the corresponding user type setting authority.
b） User types: medical personnel, hospital equipment maintenance personnel,
factory maintenance personnel.
c） User authority:
1 ） Authority of medical staff: No password. Automatically enter the
monitoring interface after starting up, and can be routinely set as required.
2 ） Authority of hospital equipment maintenance personnel: Enter the