Biolight Meditech P1 - Deleting a Configuration; Transferring a Configuration

P1 Patient Monitor User’s Manual
5-2

name.
3. Select【OK】.
5.4. Deleting a configuration
You can delete the saved user configurations by following these steps:
1. Select【Main Menu】quick keyfrom【Configuration】column to select
【Delete User Config】input maintenance passwordEnter.
2. Select the configuration you want to remove:
In the 【Delete User Config】menu, the currently existing user configuration
on the monitor is displayed.
3. Select【Delete】button.
4. In the popup dialog box to select【OK】.
CAUTION：
 The current configuration in use cannot be deleted.
5.5. Transferring a configuration
The monitor provides configuration transfer function. You can use a USB drive to
transfer the configuration from one monitor to another monitor that needs the same
settings without having to reset them item by item. The monitor supports transferring the
monitor configuration with USB disk.
5.5.1. Exporting a configuration
You can export the monitor's current user configuration to a USB drive by following
these steps:
1. Connect the USB drive to the monitor’s USB port.
2. Select【Main Menu】quick keyfrom【Configuration】column to select
【Export
User Config】input maintenance passwordEnter.
3. Select configuration that needs to be exported.
4. Select【OK】.