Biolight Meditech P1 - Screen Setup Default Settings; Color of Parameters Default Settings; Other Default Settings

P1 Patient Monitor User’s Manual
47
C.9 Screen Setup Default Settings
Item Default Setting
Interface selection Standard screen
Screen lock duration 2min
Brightness 5
Brightness (when powered
by batteries)
1
C.10 Color of parameters Default Settings
Item Default Setting
ECG Green
NIBP White
SpO
2
Yellow
TEMP Purple
RESP Cyan
CO
2
White
IBP Red
C.11 Other Default Settings
Item Default Setting
Keypad tone ON
Night
Mode
Screen
Brightness
1
Alarm volume 2
QRS volume 1
Touch Tone OFF
NIBP End
Tone
OFF