Biolight Meditech P1 - Chapter 6 User Interface; Interface Style

P1 Patient Monitor User’s Manual
6-1

Chapter 6 User Interface
6.1. Interface Style
You can set the style of the interface as needed.
6.1.1. Changing the Screen Layout
You can select the parameters and waveforms you want to view in the 【Screen
Layout】 window. For details, please refer to 3.5.2 Setting Display Screen.
6.1.2. Selecting Screen
The conventional screen is the most commonly used clinical monitoring screen for
the monitor, and the monitor enters the normal screen after being turned on. You can also
select the screen type as needed, the steps are as follows:
1. Enter 【 Screen Select 】 interface in one of the following ways :
 Select 【 Screen Setup 】 quick keySelect 【 Screen Select 】 submenu .
 Select 【 Main Menu 】 quick keyfrom 【 Display 】 column to select
【 Screen Select 】 .
2. Select screen types as needed.
6.1.3. Setting Big Font Screen
1. Enter 【 Screen Layout 】 interfacein one of the following ways:
 Select 【 Screen Setup 】 quick keySelect 【 Screen Layout 】 submenu.
 Select
【 Main Menu 】 quick keyfrom 【 Display 】 column to select
【 Screen Layout 】 .
2. Select
【 Big Font 】 submenu .
3. Click on each locale to display the parameters you want to display.
6.1.4. Changing Parameter Color
The steps for setting colors of parameter values and waveforms are as follows: