P1 Patient Monitor User’s Manual
7-4
When there are multiple alarms in the same area at the same time, the alarm
messages are displayed circularly on the screen.
7.3.4. Alarm Status Symbols
In addition to the alarm methods described in section Alarm Indicators, the
following alarm icons will appear on the screen to indicate different alarm states:
Indicates an alarm for a parameter is off or the alarm system is off.
Indicates all the alarms are paused.
Indicates the alarm sound is off.
Indicates
alarms are reset.
7.4. Viewing physiological alarms list
The steps of viewing physiological alarms are as follows:
1. Selectphysiological alarms area to enter【Alarm Informations】window.
2. Select【Phy. Alarm】submenu.
7.5. Viewing technical alarms list
The steps ofviewing technical alarms list are as follows:
1. Selecttechnical alarms area to enter
【
Alarm Informations
】
window.
2. Select【Tec. Alarm】submenu.
7.6. Viewing the graphical display of technical alarms (Alarm View)
In the technical alarms list, if “---” is prompted behind the alarm information, the
alarm contains help information of pictures to help you identify the cause of the alarm.
The steps of viewing the help information of alarms are as follows:
1. Select
technical alarms area to enter
【
Alarm Informations
】
window.
2. Select【Tec. Alarm】submenu.
3. Select the alarm you need to view in the alarms list.
To Next Page
Loading...