P1 Patient Monitor User’s Manual
3-4
WARNING：
If the monitor is damaged or does not work properly, do not use it for any
monitoring procedure on a patient. And then please contact the maintenance
personnel or the manufacturer immediately.
3.2.3. Starting Monitoring
1. Decide what parameters should be monitored or measured.
2. Connecting required cables and sensors.
3. Check whether the connection of cables and sensors is correct.
4. Check whether all kinds of settings are correct, for example: 【Patient Type】 and
【Paced】. For detailed information on the measurement or monitoring of each
parameter, please refer to the corresponding chapters.
3.3. Operation and Browse
Almost every element on the screen is interactive. Screen elements include parameter
values, waveforms, quick keys, information area, alarms area, menus, etc. Often you can
access the same element in different ways. For example, you can access a parameter setup
menu by selecting corresponding parameter area or waveform area.
3.3.1. Using the Touch screen
Click on the touch screen to complete some operations quickly and easily.
3.3.1.1. Gesture Operation
Click touch screen
Click options of menu or list, or clip button to select.
Click parameter area or waveform area to enter corresponding setup menu.
For example, click ECG parameter area or waveform area to enter 【ECG】
menu.
Slide one finger
Slide up and down the menu of list to display more options.
To Next Page
Loading...