P1 Patient Monitor User’s Manual
48
C.12 Maintenance Item Default Settings
Item Default Setting
Network Type LAN
LAN IP Use the Following Address
Frequency 2.4G
Device No. 8
Alarm Pause Duration 2min
Minimum alarm volume 2
Alarm Sound ISO
High Alarm Interval (s) 10
Medium Alarm Interval (s) 20
Low Alarm Interval (s) 20
Reset Remote Bed’s Alarms OFF
Alarm Reset By Other Bed OFF
Alarm Off ON
Reminder Interval 5min
ECGLead Off Alarm Level MED
Alarm delay OFF
Notch filter 50 Hz
Nurse
call
Signal type Continuous
Trigger method N.O.
Alarm level All
Alarm type Technical Alarm & Physiological Alarm
To Next Page
Loading...