To Next PageTo Next Page
Need help?Do you have a question about the BIOPAC Systems MP36 and is the answer not in the manual?
Details safety standards and compliance for MP acquisition units.
Explains symbols and describes types of devices connecting to MP36/35/45.
Describes the components and ports on the front and back panels of MP36/35.
Covers DC input, fuse holder, power switch, and cleaning procedures for MP36/35.
Details specifications for analog input and output channels on MP36/35/45.
Describes the available input triggering options for MP36/35/45.
Explains the terms and functions of the BSLSTMA/B and BSLSTM front/back panels.
Provides crucial safety and usage guidelines for stimulator electrodes.
Describes the SS3LA EDA transducer and provides usage recommendations.
Describes the TSD200/SS4LA pulse photoplethysmogram transducers.
Details tri-axial accelerometer types, specifications, setup, and calibration.
Covers blood pressure cuff systems, specifications, and calibration procedures.
Describes goniometers/torsiometers, attachment, specifications, and usage.
Describes various BNC input adapters for connecting external devices.
Details transducer connector interfaces and their pin-outs.
Lists and describes the BSLCBL series of interface and extension cables.
Describes the GASSYS2 system, its components, calibration, and cleaning.
Details the NIBP100D system, specifications, setup, recording, analysis, and troubleshooting.
General| Type | Data Acquisition System |
|---|---|
| Resolution | 16-bit |
| Input Range | ±10V |
| Connectivity | USB |
| Software | AcqKnowledge |
| Software Compatibility | Windows, macOS |
| Sampling Rate | Up to 400 kHz (aggregate) |
| Power Supply | USB |
| Weight | 0.45 kg |
| Compatibility | BIOPAC electrodes and transducers |
