info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | AFT Series | Page 3 - 7 Updated: 12.3.2013
FACEMASKS, FACEMASK ACCESSORIES
AFT10 Disposable Adult Facemask
These mouthpieces connect to 22 mm breathing circuits. Connects directly to the AFT1, AFT22 non-
rebreathing T-valve, or SS11LA/TSD117 airflow transducer (via AFT11B coupler). Includes hook-ring
to secure AFT10S adjustable head strap. (22 mm ID/25 mm OD)
MRI Use: MR Safe
AFT10 Facemask Components: Thermoplastic Elastomer, Polyvinyl Chloride (PVC) Plastic
AFT10S Adjustable Head Strap
This fully adjustable latex head strap holds the AFT10 disposable facemask securely to the subject’s
head. Use one or more straps to securely fasten the mask.
MRI Use: MR Safe
AFT10S Head Strap Components: Latex Rubber
AFT25 Facemask with Valve
This adult facemask with integral non-rebreathing T valve is a high
performance, very low dead space, low airflow resistance mask and
valve; suitable for high airflow applications (e.g. exercise physiology).
The AFT25 incorporates two gas sampling ports (female Luer) for
interfacing with the AFT20 Gas Sampling Kit. All ports are 35 mm OD,
28 mm ID
MRI Use: MR Safe
AFT25 Facemask Components: Mask: Thermoplastic Elastomer, Valve:
Acetal Plastic, Acrylic Plastic,, Aluminum (nickel plated silver,) Elastomer, Nylon, Thermoplastic
Polyester, Polycarbonate Plastic, Silicone Rubber, Stainless Steel, Polysulfone Plastic
Headgear: Fabric with Velcro
straps
COUPLERS
MRI Use: MR Safe
AFT11 Series Coupler Components: Thermoplastic Rubber, Polyvinyl Chloride (PVC) Plastic,
Polycarbonate Clear Plastic, Acrylonitrile Butadiene Styrene (ABS) Thermo-molded, Plastic
AFT11A Flexible AFT11D Flexible AFT11H Flexible
AFT11B Rigid AFT11E Flexible AFT11I Flexible (for AFT26)
AFT11C Rigid AFT11F Rigid
These couplers are very useful for connecting up a variety of airflow port IDs and ODs to transducers, tubing and
calibration syringes. Pick an AFT11 Series coupler that matches the port sizes to be interfaced.
To Next Page
Loading...