info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | SS14L | Page 1 - 1 Updated: 2.8.2013
See also: Tension Adjuster (HDW100A)
SS14L DISPLACEMENT TRANSDUCER
For use in recording very slight movements in a range of physiological
preparations, the SS14L incorporates a semi-isotonic strain gauge and a stainless
steel lever that can be mounted in any position.
SS14L SPECIFICATIONS
Sensitivity Range: 1mm to 100mm
Strain Gauge: 500 ohm silicon
Lever Length: 27cm
Support Rod Length: 15cm
Cable Length: 3 meters
Interface: MP3X
To Next Page
Loading...