info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | SS10L | Page 1 - 1 Updated: 7.1.2013
SS10L PUSHBUTTON HAND SWITCH
The SS10L pushbutton hand switch is used for remote event marking or for
psychophysiological response tests. This easy to hold pushbutton switch is very rugged and
reliable, and makes it simple to mark events during recording. When data from the button
is displayed on the screen, it normally reads 0 Volts, and when the button is pressed it
reads +5 mV.
SS10L SPECIFICATIONS
Cable Length: 2 meters
Connector Type: 9 Pin DIN to MP36/35 front panel input
To Next Page
Loading...