info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | SS6L – SS18L | Page 1 - 2 Updated: 2.26.2013
TEMPERATURE TRANSDUCERS
SS6L: Fast Response
SS7L: Waterproof Probe
SS8L: Liquid Immersion Probe
SS18L Digit Surface
SS6L TEMPERATURE TRANSDUCER
The SS6L is a small fast-response thermistor used to measure small variations
in temperature, either on the skin surface or in exhaled airflow. The recorded
temperature changes during breathing can be used to indicate respiration rate.
Attach the SS6L to the skin surface with Surgical Tape (TAPE1).
RX202A Sens
or (white) shown at right with transducer connector (black);
ships as sensor only.
This is a replacement sensor for
TSD202A for MP research systems
SS6L for BSL education systems
SS6 for telemetry/wireless systems
The sensor snaps onto the "SS" transducer connector for connection to a BIOPAC data acquisition system.
SS6L SPECIFICATIONS
Response time: 0.6 sec
Nominal resistance: 2252 @ 25°C
Maximum operating temperature: 100°C
Accuracy and Interchangeability: ±0.1°C
Connector Type: 9 Pin DIN
Compatibility: YSI® series 400 temperature probes
Cable Length: 2 meters (flexible, lightweight)
Sterilizable: Yes (contact BIOPAC for details)
Dimensions: 5m 1.7m
SS7L WATERPROOF PROBE
Use this vinyl probe for core (oral/rectal) temperature recordings.
SS7L SPECIFICATIONS
Response time: 1.1 sec
Max operating temp: 60°C
Accuracy & Interchangeability: ±0.2°C
Compatibility: YSI(r) series 400
Dimensions: 9.8 mm x 3.3
Cable: 3 meters
To Next Page
Loading...