info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | HSTM01 | Page 1 - 1 Updated: 7.16.2012
HSTM01 HANDHELD HUMAN-SAFE STIMULATING PROBE
IMPORTANT!
BIOPAC HSTM Series Probes must be used when
stimulating humans. HSTM probes have current-limiting
features, enhanced isolation and a user-operated “dead man”
switch for optimum safety
WARNING!
Even with the HSTM probe, users must never create an
electrical path across the heart (i.e. touching an active tip in
each hand while the switch is engaged) and it should never
be used on subjects with pacemakers.
The HSTM01 handheld human-safe stimulating
probe provides a superior degree of safety and
comfort when using the Biopac Student Lab
Stimulator for human stimulation. The
ergonomic design allows the subject to focus on
electrode placement instead of worrying about
holding the electrode. The subject controls the
stimulus presentation by activating the red safety
switch. To stop the stimulus at any time, the
subject simply removes his/her thumb from the
switch and the electrode shuts off. The electrode
is terminated in a BNC connector that interfaces
with the BSLSTMA.
HSTM01 SPECIFICATIONS
Safety Switch: Yes
Lead Length: 3 m
Connector Type: BNC
Interface: BSLSTMA
To Next Page
Loading...