info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | EL120 | Page 1 - 1 Updated: 2.28.2013
ELECTRODES
In selecting the application site for any style of electrode, care should be taken that:
1) Electrode site is dry and free of excessive hair.
2) Electrode is not placed over scar tissue or on an area of established erythema or with a lesion of any kind.
3) Skin is properly prepared. (Prepare the skin at the electrode site. Use the ELPAD to lightly abrade the skin
surface. Use a brisk dry rub to prepare the application site. Avoid excessive abrasion of the skin surface.)
EL120
The EL120 electrode has contact posts designed to improve
contact through fur or hair. The 12 posts create a 10 mm
contact area. The posts are 2mm deep to push through fur/hair
to provide good contact with the skin surface.
Shipped in packs of 10.
Silver-silver chloride (Ag-AgCl) electrodes provide accurate and clear transmission of surface biopotentials and
are useful for recording all surface biopotentials on animals and human EEG.
Notes:
It is not necessary to use an EL120 for the ground; a generic electrode can be used for ground.
Requires one LEAD120 per electrode.
To Next Page
Loading...