info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | AFT Series | Page 1 - 7 Updated: 12.3.2013
See also: Student Accessory Pack BSL-ACCPACK
AFT SERIES AIRFLOW & GAS ANALYSIS ACCESSORIES
Includes the following airflow accessories:
AFT1 AFT9 AFT11E AFT15 AFT26
AFT2 AFT10 AFT11F AFT20 AFT30
AFT3 AFT10S AFT11G AFT21 AFT31
AFT4 AFT11A AFT11H AFT22 AFT35
AFT6A AFT11B AFT11I AFT23
AFT7 AFT11C AFT12 AFT24
ATF8 AFT11D AFT13 AFT25
DISPOSABLE BACTERIAL FILTERS
MRI Use: MR Safe
AFT1/4/13 Bacterial Filter Components: Polycarbonate Clear Plastic
AFT1 Disposable Bacterial Filter Available in Packs of 10 or 250
Designed to remove airborne bacteria. Pore Size: Virus Filtration Efficiency (VFE): 3.1 micron;
Bacterial Filtration Efficiency (BFE): 2.8 micron. Use between the SS11LA or TSD117 and the AFT2.
22 mm ID/OD.
AFT4 Disposable Bacterial Filter
Designed to remove airborne bacteria; for use with the TSD107B, AFT4, or other 35 mm breathing
circuits, connects between the AFT7 and the AFT9. (35 mm ID/35 mm OD)
AFT13 Disposable Pulmonary Function Filter and Mouthpiece Available in packs of 10 or 250
Eliminate cross-contamination concerns with this bacteriological filter
with disposable plastic-coated paper mouthpiece to protect subjects
and equipment. These exceed all recommended performance standards
with 99.9% bacterial filtration efficiency and 99.9% viral filtration
efficiency. They feature low resistance and minimal dead space (45 ml
when measured without tube fittings). These surpass published ATS
recommendations for flow resistance in pulmonary function
instrumentation, which suggest resistance should be below 1.5 cm
H2O/L/sec at flow rates less than 12 liters/sec. Port: 30 mm OD.
To Next Page
Loading...