BIOPAC Systems MP36 - Lesson Hardware Guide

To Next Page

To Previous Page

info@biopac.com

support@biopac.com

www.biopac.com

BIOPAC Hardware | MP36/35/45 | Page 8 - 11 Updated: 12.23.2013

NOTE: This“Lesson Hardware Guide” table refers to page numbering from the Biopac Student Lab Catalog. See

the catalog for information contained in any of these page references.

HARDWARE GUIDE

Main Page

BSL HARDWARE GUIDE1
MP36-MP35-MP452
- MP ACQUISITION UNITS2
Stimulators MP3X13
- BSL Stimulators13
- Stimulator Pulse Definitions13
- Front Panel Terminology14
- Back Panel Terminology15
- Connecting the BSLSTM to the MP3X17
- Low Voltage Stimulator20
SS1LA22
- SS1LA Shielded Electrode Adapter22
- SS1LA Specifications22
SS2L23
- SS2L Electrode Lead Set23
- SS2L Specifications23
SS3LA24
- SS3LA EDA (Electrodermal Activity) Transducer24
- Usage Recommendations24
- SS3LA Specifications25
- Cleaning the SS3LA Transducer25
Pulse Transducer26
- TSD200 for MP150/MP100 System26
- SS4LA for MP3X and MP45 System26
- TSD200C Photoelectric Pulse Plethysmograph with Earclip26
- TSD200/200C/SS4LA Specifications27
SS5LB28
- SS5LB Respiratory Effort Transducer28
- SS5LB Specifications28
SS6L-SS18L Temp29
- SS6L Temperature Transducer29
- SS6L Specifications29
- SS7L Waterproof Probe29
- SS7L Specifications29
- SS8L Liquid Immersion Probe30
- SS8L Speifications30
- SS18LA Digit Surface Temperature Transducer30
- SS18L Specifications30
SS10L31
- SS10L Pushbutton Hand Switch31
- SS10L Specifications31
Pneumotach Handheld32
- Medium-flow Pneumotach Transducer32
- Normal Measurement Connections32
- Data Processing33
- Calibration for Medium-flow Pneumotachs33
- Syringe Calibration33
- Mathematical Calibration33
- SS11LA to MP3X Connection34
- Rough Calibration (MP3X)34
- Using the Calibration Syringe35
- Recording with the Airflow Transducer36
- RX117 Replacement Airflow Head38
- MRI Usage Declarations for TSD117-MRI38
- SS11LA & TSD117 Technical Specifications38
SS12LA39
- SS12LA Variable Range Force Transducer39
- SS12LA Specifications40
- Calibration40
- Force Transducer Calibration40
SS13L42
- SS13L Pressure Transducer42
- Pressure Transducer Calibration42
- SS13L Specifications43
- RX104A Replacement Element44
SS14L45
- SS14L Displacement Transducer45
- SS14L Specifications45
Contact Microphone46
- TSD108/SS17L Physiological Sounds Microphone46
- Specifications46
BP Transducers47
- Bllod Pressure Cuff and Transducer47
SS20L-SS24L Goniometers51
- Attachment to the Subject52
- Warnings53
- Maintenance & Service53
- Calibration53
- Specifications54
- Overview of the BIOPAC Goniometer Series55
- Sign Conventions57
- WRIST – Goniometer TSD130A/SS20L/SS20/BN-GON-110-XDCR58
- Articular Complex of the Foot – Goniometer TSD130A/SS20L/SS20/BN-GON-110-XDCR58
- ELBOW – Goniometer TSD130B/SS21L/SS21/BN-GON-150-XDCR58
- HIP – Goniometer TSD130B/SS21L/SS21//BN-GON-150-XDCR58
- KNEE – Goniometer TSD130B/SS21L/SS21/BN-GON-150-XDCR59
- FOREARM PRONATION /SUPINATION – Torsiometer TSD130C/SS22L/SS22/BN-TOR-110-XDCR or TSD130D/SS23L/SS23/BN-TOR-150-XDCR59
SS25LA60
- Hardware Setup60
- Scaling — Software Setup for the MP3X60
- Calibration Confirmation60
- SS25LA Specifications61
Accelerometers62
- Tri-axial Accelerometers62
- Accelerometer Specifications (SSL/TSD)62
- Hardware Setup63
- Software Setup63
- Testing Calibration63
- BioNomadix Wireless Accelerometer64
- BN-ACCL3 Specifications64
Heel-Toe Strike65
- Heel-Toe Strike Transducers65
- Heel-Toe Strike Specifications65
- RX111 Replacement Heel-Toe Strike Sensor65
SS29L66
- SS29L Multi-Lead ECG Cable66
- SS29L Specifications66
SS30L67
- SS30L Electronic Stethoscope Transducer67
- SS30L Specifications67
SS31L68
- SS31L Noninvasive Cardiac Output Sensor68
SS36L69
- SS36L Reflex Hammer69
SS39L70
- SS39L Breadboard70
SS40L-42L Differential Pressure71
- SS40L – 42L Differential Pressure Transducer71
- SS40L – 42L Specifications71
SS43L72
- SS43L Variable Assessment Transducer72
- SS43L Specifications72
Pneumotach 100 Series73
- Pneumotach Airflow Transducers (Very Low Flow)73
- TSD137 Series for MP150/MP100 System73
- SS46L-SS52L Series for MP3X AND MP45 System73
- RX137 Series Replacement Airflow Heads73
- Pneumotach Airflow Transducer Calibration73
- Flow Head Cleaning & Disinfection73
- TSD/RX137 & SS46L-SS52L Series Specifications74
Pneumotach 200 Series75
- Available Flow Rates75
- RX237 Series Replacement Airflow Heads75
- TSD/SSLA/RX237 Series Specifications75
SS53L-SS55L Switches76
- SS53L – SS55L Digital Switch Series76
SS56L77
- SS56L Hand Clench Force Bulb77
SS57L78
- SS57L EDA Lead for Disposable Setups78
SS60L79
- SS60L Signal Cable for SS39L Breadboard79
SS61L80
- SS61L Finger Twitch Transducer80
SS62L81
- SS62L Speech Frequency Microphone81
SS63L-SS66L Force Transducers82
- SS63L – SS66L Specifications82
SS67L83
- SS67L Pressure Pad/Respiration Transducer83
- RX110 Pressure Pad83
- RX110 Specifications83
SS68L84
- SS68L PH Probe Transducer84
- SS68L Specifications84
SS69L85
- SS69L Dissolved Oxygen Probe Transducer85
- Setup85
- Warm-up85
- Calibration86
- TABLE 187
- TABLE 287
- CONVERSION FORMULA FOR % SATURATION88
- Recording88
- Storage88
- Polishing88
SS9L-SS70L-SS71L89
- SS9L Unisolated BNC Input Adapter89
- SS9L Specifications89
- SS70L Isolated BNC Input Adapter for MP36/MP3589
- SS71L Isolated BNC Input Adapter for MP3089
- SS70L – SS71L Specifications89
AFT Series90
- AFT SERIES AIRFLOW & GAS ANALYSIS ACCESSORIES90
BSL-TCI97
- Transducer Connector Interfaces (TCI)97
- BSL-TCI Pin-Outs97
BSLCBL Series100
- BSLCBL1A/2A100
- BSLCBL3A/4B100
- BSLCBL3A/4B Specs100
- BSLCBL5/6101
- BSLCBL7/11/12101
- BSLCBL8/9101
- BSLCBL14101
CBL200 Series102
- CBL200 Series Lead Connector Conversion Tables102
- CBL200102
- CBL201102
- CBL202102
- CBL203102
- CBL204102
- CBL205102
- CBL206103
- CBL207103
CBLUSB104
HSTM01105
- HSTM01 Handheld Human-Safe Stimulating Probe105
EL120106
EL160107
- EL160 Gold Cup107
- EL160-EAR – Ear Clip Electrodes107
- EL160-EAR Specifications107
EL250 Series108
- EL250 Series Reusable AG-AGCL Electrodes108
- Instructions for EL250 Series Electrodes109
EL350 Series110
- EL350 Series Bar Lead Electrodes110
- EL350 Specifications110
EL450 Series111
EL500 Series112
- EL500112
- EL501112
- EL502112
- EL503112
- EL504112
- EL506113
- EL507113
- EL508113
- EL509113
- EL510114
EL650 Series115
ELSTM Series116
- ELSTM1 Unshielded Stimulating Bar Electrode116
- ELSTM2 Unshielded Needle Electrodes116
Electrode Leads120
- LEAD108 Series — MRI-Compatible/Radiotranslucent Leads for EL508/509120
- Specifications120
- LEAD110 Series — Electrode Leads120
- LEAD120 Lead for EL120120
- LEAD130 Shielded Lead Assembly120
- LEAD140 Series Clip Leads121
GASCAL-GASREG122
GASSYS2123
- GASSYS2-CO2 & O2 Gas Analysis System123
- GASSYS2 Specs123
- GASSYS2 Software Scaling Defaults124
- Calibration Procedure124
- Cleaning the BIOPAC GASSYS2125
HDW Series127
- HDW100A Force Transducer Tension Adjuster127
- HDW100A Specifications127
- HDW200 Adapter for 3rd-party Tension Adjusters127
Micromanipulator128
NIBP100D129
- NIBP100D Noninvasive Blood Pressure System129
- Specifications129
- Double Cuff Finger Sensor129
- Blood Pressure Cuffs (Latex free)129
- NIBP100D Continuous Noninvasive Arterial Pressure129
- Interface130
- Output130
- NIBP100D Monitor130
- Electrical Properties130
- External Mains Adapter130
- Hyperbaric/Hypobaric Chamber Setup131
NIBP200A-NIBP250132
- Specifications133
- NIBP200A System Connections133
- Animal Preparation134
- Software Setup135
- Recording137
- NIBP200A Analysis137
- NIBP250 Quick Guide138
- Troubleshooting139
Nerve Chambers140
- NERVE1 - with Agent Well & Lid140
- NERVE2 - Standard Nerve Chamber140
- Specifications140
- Related Components140
- Nerve Chamber Connections141
OUT Series142
- OUT1 Headphones142
- OUT1 Specifications142
- OUT1A142
- OUT1A Specifications142
- OUT2 BNC (M) Output Adapter143
- OUT2 Specifications143
- OUT100143
- OUT100 Specifications143
- OUT101 Tubephone143
- OUT101 Specifications144
- Calibration for Auditory Brainstem Response Studies144
- OUT102 Piezo Audio Transducer144
- OUT102 Specifications144
- OUT103 LED Cable145
- MP150 and UIM100C Setup145
- MP36R Setup - Additional Items Required145
- Calibration145
- 40HP Monaural Headphones145
- 40HP Specifications145
Power Supplies146
BAT100A147
- BAT100A Battery Pack Specifications148
SS-KIT149
- SS-KIT-IN Transducer Connector Interface Kit - Input149
- SS-KIT-OUT Transducer Connector Interface Kit - OUTPUT150
- SS-KIT-OUT Specifications151
- Assembly Notes151
SuperLab for MP3X152
- STP35W Components152
- STP35 MP36/35 to SuperLab152
- STP35A MP36/35 to Parallel152
Tissue Bath Stations153
- Tissue Bath Accessories/Reorder Parts154
- Tissue Bath Accessories Specifications154
Circulator155
- Circulator A/B Heating Circulators155
- Circulator Setup and Usage Guide155
- Calibration155
- Error Codes155
- Circulator Setup & Usage Guidelines156
- Troubleshooting157
- Technical Specifications157

BIOPAC Systems MP36 - Lesson Hardware Guide

Table of Contents