EasyManua.ls Logo

BIOPAC Systems MP36 - TSD200;200 C;SS4 LA Specifications

BIOPAC Systems MP36
157 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
info@biopac.com
support@biopac.com
www.biopac.com
MP Research System | Pulse Transducers | Page 2 - 2 Updated: 12.3.2012
TSD200/200C/SS4LA SPECIFICATIONS
Emitter/Detector Wavelength: 860 nm 60 nm
Optical Low Pass Filter Cutoff Wavelength: 800 nm
Note The operational range of the emitter and detector fall within the
wavelength range of 800 nm to 920 nm. The filter is placed over the
receiver, the filter of 800 nm is an optical lowpass, so wavelengths
longer than 800 nm will pass thru.
Nominal Output: 20 mV (peak-peak)
Power: 6 VDC Excitation @ 5 mA
Sterilizable: Yes (Contact BIOPAC for details)
Weight: 4.5 g
Dimensions (L x W x H): 16 mm x 17 mm x 8 mm
Attachment: Velcro strap
Cable: 3 m, shielded
Interface: PPG100C
TEL100C Compatibility: SS4A
NOTE THE TSD200A EAR CLIP TRANSDUCER WAS DISCONTINUED IN AUGUST OF 2008.
HARDWARE GUIDE

Table of Contents