info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | In-line Power Supplies | Page 1 - 1 Updated: 12.19.2013
IN-LINE POWER SUPPLIES
AC150A Power Supply AC137A Power Supply
All AC series in-line power supplies are CE marked for the EC Low Voltage Directive and EMC Directive, and
all have UL and TUV approval. The units have standard IEC power input plugs and operate over mains power
ratings of 100-240 VAC, 50-60 Hz. Each includes a USA or EURO power cord. (ACCORD US/EURO,
ACCORD-HUS Hospital Grade)
AC101A ±12 volt, +5 volt, 1 amp Connects the LDF100C to the AC mains wall outlet. One supply is
included with each LDF100C module.
AC137A +6 volt, 1.5 amp Powers the heating element for any of the TSD137 series pneumotachs.
AC150A +12 volt, 4.17
amp Connects the MP150 System to the AC mains wall outlet. One supply
is included with each MP150 Starter system.
AC300A +12 volt, 1.25 amp Connects the MP or GASSYSTEM2 to mains wall outlet. One supply
is included with MP36/35 system, MP100 or GASSYSTEM2.
See also: IPS100C Isolated Power Supply
To Next Page
Loading...