info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | OUT SERIES | Page 1 - 4 Updated: 1.6.2014
OUT SERIES
OUT1 High Fidelity Headphones
OUT1A Ultra-Wide Frequency Response Headphones
OUT2 BNC Output Adapter
OUT100 Monaural Headphones
OUT101 Tubephone
OUT102 Piezo Audio Transducer
OUT103 LED Cable
40HP Monaural Headphones
For OUT3, see Stimulators
OUT1 HEADPHONES
These wide r
esponse high-
fidelit
y
headphones are used
for auditory stimulus (short tones or clicks) or to listen
to physiological signals (like EMG) directly. The
Headphones are comfortable and lightweight (3 ounces)
and include a 2-meter cable so the Subject can be seated
a comfortable distance from the acquisition unit.
Unlike other Smart Sensors that connect to the MP3X,
the OUT1 connects to the “Analog out” port on the
back panel of the MP3X.
OUT1 SPECIFICATIONS
Cable Length: 2 meters
Connector Type: 9 Pin DIN (female
)
OUT1A
These ultra-wide frequency response headphones connect directly to the headphone port on the MP36 or MP36R
data acquisition unit.
Features of these multi-purpose headphones include:
High dynamic range
High-resolution capsule
1/8" con
nector plus 1/4" adapter included
Single-sided cord
Oval-shaped ear cups
Comfortable headband
High-quality components and exceptionally rugged construction
OUT1A SPECIFICATIONS
Connector: 1/8" TRS connector plus 1/4" TRS adapter
Interface: MP36 or MP36R (not compatible with other MP units)
Frequency response: 20 Hz - 20 kHz
Max. power handling: 100 mW
Impedance: 32 Ohm
Sensitivity: 105 dB @ 1 kHz
Cord length: 2 meters
Dimensions: 11-3/4" x 9-3/4" x 8-1/4"
To Next Page
Loading...