info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | SS1LA | Page 1 - 1 Updated: 12.13.2012
SS1LA SHIELDED ELECTRODE ADAPTER
The fully-shielded electrode interface cable permits high resolution
recording of biopotential signals. The 3-meter adapter cable accepts
standard Touchproof connectors. Use this lead adapter with:
LEAD120 for EL120 contact post electrodes or
EL250 series reusable Ag-AgCl electrodes or
EL450 series needle electrodes or
LEAD110 series shielded and unshielded leads
SS1LA SPECIFICATIONS
Cable length 3-meter
Termination standard Touchproof connectors
Note: The SS1L is a 3-meter electrode adapter for older style 2 mm pin connections. To convert 2 mm pin
connections to Touchproof 1.5 mm connections, use CBL201.
To Next Page
Loading...