info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | SS6L – SS18L | Page 2 - 2 Updated: 2.26.2013
SS8L LIQUID IMMERSION PROBE
Use this stainless steel probe for dry or wet bath temperature
measurements.
SS8L SPECIFICATIONS
Response time: 3.6 sec
Max operating temp: 60°C
Accuracy & Interchangeability: ±0.2°C
Compatibility: YSI(r) series 400
Dimensions: 4 mm X 115 mm
Cable: 3 meters
SS18LA DIGIT SURFACE TEMPERATURE TRANSDUCER
The SS18LA is designed to record skin temperature of the fingers or
toes. The probe contains a surface temperature sensing element encased
in a polyurethane housing that conforms to curved skin surfaces and
includes a Velcro strap for easy attachment.
SS18L SPECIFICATIONS
Response time: 1.1 sec
Size
with housing: 16 mm (long) x 17 mm (wide) x 8 mm (high)
sensor only: 10 mm sensing diameter, 1.4 mm sensor thickness
Interface: MP3X
Nominal Resistance: 2252 ohms at 25°C (sensor only)
Maximum operating temperature: 60°C (when used with MP3X)
Accuracy and Interchangeability: 0.2°C (after calibration)
Cable Length: 3 meters
Compatibility: YSI series 400 temperature probes (sensor only)
Sterilizable: Yes (contact BIOPAC for details)
To Next Page
Loading...