info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | BAT100A | Page 2 - 2 Updated: 3.1.2013
BAT100A BATTERY PACK SPECIFICATIONS
Battery
Chemistry: LiFePO
4
(Lithium Iron Phosphate)
Output Capacity: 12V @ 15 amp-hours
Working Output Voltage Range: 13.2 V – 12 V
Output Connector: DC Barrel Plug (5.5 mm OD, 2.1 mm ID – Center positive)
Operating Time: MP3X with 4 sensors: 26 hours nominal
MP150 with 4 modules: 16 hours nominal
Charge Time: 5 hours (nominal)
Recharge Cycles: (number of cycles to 80% of original capacity): 1500 (typical minimum)
Operating Temperature Range: 0° C to 45° C
Storage Temperature Range: -20° C to 60° C
Weight: 2.45 kg
Dimensions: (includes carrying case) 14cm (high) x 19cm (wide) x 14cm (deep)
Battery Charger (For BAT100A only)
Maximum Nominal Charge Voltage: 14.4 V @ 3.0 amps (Charges at 3 amps to 14.4 V, then potentiostatic at
14.4 V until current is less than 0.5 amps)
Input: 120/240 VAC @ 50/60 Hz (USA or EURO power cord)
Output Connector: DC Barrel Socket (5.5 mm OD, 2.1 mm ID – Center positive)
Operating Temperature Range: 0° C to 45° C
Storage Temperature Range: -20° C to 60° C
Weight: 285 grams
Dimensions: 3.8cm (high) x 6.4cm (wide) x 15cm (long)
To Next Page
Loading...