info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | Tissue Bath Stations | Page 1 - 2 Updated: 3.22.2013
TISSUE BATH 1, 2, 4, 8 TISSUE BATH STATIONS
The Tissue Bath Station is completely modular, and can
be purchased in multiples of one unit. The System
includes all of the glassware, tubing, reservoir, tissue
hooks and mounting accessories, force transducer and
micrometer tension adjuster.
The ergonomic design of the station allows the tissue bath
to be lowered away from the tissue holder so that
mounting of the tissue preparation is very easy. The taps
for filling and draining the bath are mounted on the tubing
to avoid the risk of accidental bath breakage. The entire
station is mounted on a convenient base stand, which
creates a sturdy platform for the experiment. The unique
design makes it easy to add or remove stations to provide
the optimal solution for the requirements.
When a system is ordered, the size of the tissue bath and
heating coil must be specified.
Each Tissue Bath station includes:
1 Reservoir
1 Reservoir Holder
1 Transducer Holder
1 Warming Coil Holder
1 Warming Coil (specify 5 ml, 10 ml, 20 ml, or 30 ml
size)
1 Tissue Holder (glass; left)
1 Tissue Holder (stainless steel; right)
2 Triangle Tissue Holder (stainless steel)
2 Tissue Clip (stainless steel)
1 Bath Holder
1 Tissue Bath (specify 5 ml, 10 ml, 20 ml size)
1 Oxygen Filter (glass)
1 Micrometer Assembly
1 Mount Accessories Kit
1 Base Station with Support Rods
1 TSD125 Force Transducer (specify TSD125 model
C, D, E or F)
See also: BIOPAC Circulators, or use an existing system.
To Next Page
Loading...