info@biopac.com
support@biopac.com
www.biopac.com
BIOPAC Hardware | SS29L | Page 1 - 1 Updated: 7.16.2012
SS29L MULTI-LEAD ECG CABLE
The SS29L Multi-Lead ECG Cable permits high-
resolution ECG recordings. This multi-lead set can
simultaneously record Leads I, II, III, aVR, aVL,
aVF, plus one precordial chest lead V(1-6). A 12-
Lead ECG recording can be obtained by alternating
the chest lead electrode from position V1 through
V6. The cable terminates in three Smart Sensors that
connect to the MP3X.
SS29L SPECIFICATIONS
Input Cable Length: 2 meters
Electrode Lead Length: 1 meter
Internal connection: Built-in Wilson terminal
Electrode interface: Connects to standard snap-connector disposable electrodes (EL503
)
To Next Page
Loading...