To Next PageTo Next Page
Need help?Do you have a question about the Bosch CB 28 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | CB 28 |
| Category | Boiler Supplies |
| Language | English |
Details symbols and warnings within the documentation and on the product.
Instructions to observe warning notices on products and ensure they remain legible.
Provides important information on copyright, liability, warranty, and user/company obligations.
Details safety instructions found in a separate manual for Bosch Diesel Test Equipment.
States that these instructions are valid in conjunction with specific test bench and system manuals.
Describes the accessory kit's purpose for testing common rail pumps with specific test equipment.
Lists the components included in the accessory kit with their part numbers.
Lists additional special accessories required for the test setup with their part numbers.
Outlines the necessary equipment, software, and knowledge for performing the tests.
Provides step-by-step instructions for installing the EPS 945 software from a CD.
Detailed procedure for securely mounting the CB 28 pump onto the EPS test bench.
Overview of the hydraulic connections for the EPS 815 without automatic pressure control.
Details the hydraulic connections for the EPS 815 without automatic pressure control.
Details the hydraulic connections for the EPS 815 with automatic pressure control LPC 800.
Instructions for connecting the CB 28 pump electrically to the ZME unit.
Procedure for safely switching on the EPS test bench and initiating the software.
Steps to select a test sequence, activate functions, and start the pump test procedure.
Explains the automatic mode, waiting/measuring times, and test completion process.
Table outlining maintenance tasks and their recommended intervals (weekly/yearly).
Guidelines for inspecting exhaust gas sampling hoses and identifying damage requiring replacement.
Procedure for replacing high-pressure hoses based on operating pressure and age.
Instructions for replacing the radial shaft seal on the fixing flange if damage or leakage occurs.
Lists spare and wearing parts with their corresponding part numbers.
Instructions for handing over documentation and packaging when changing the unit's location.
Information on handling hazardous substances, including water pollutants, and proper disposal of the unit and accessories.
