Bosch CB 28 - English

1 689 989 212 2014-10-31| Robert Bosch GmbH
| 1 687 010 496 | 13 en
1. Symbols used 14
1.1 In the documentation 14
1.1.1 Warning notices -
Structure and meaning 14
1.1.2 Symbols in this documentation 14
1.2 On the product 14
2. User information 14
2.1 Important notes 14
2.2 Safety instructions 14
2.3 General Instructions 14
3. Product description 15
3.1 Intended use 15
3.2 Scope of delivery 15
3.3 Special accessories 15
3.4 Prerequisites 15
3.5 Installing the EPS 945 software 15
4. Preparation for testing 16
4.1 Clamping the CB 28 16
4.2 Hydraulic connection of CB28 17
4.2.1 Without automatic pressure control 17
4.2.2 With automatic pressure control
LPC800 18
4.3 Electrically connecting the CB 28 19
5. Testing 19
5.1 Switching on the EPS 19
5.2 Starting the test procedure 20
5.3 Description of the pump test 20
6. Maintenance 20
6.1 Maintenance intervals 20
6.2 Check exhaust gas sampling hoses 20
6.3 Replacing the high-pressure hose 20
6.4 Replacing radial shaft seal 21
6.5 Spare and wearing parts 21
7. Decommissioning 21
7.1 Change of location 21
7.2 Disposal and scrapping 21
7.2.1 Substances hazardous to water 21
7.2.2 1 687 010 496 and accessories 21
Contents English