BRP E-TEC EVINRUDE - Block Venting; Water Pressure Connection

Cooling System
Components
184
Block Venting
A fitting and hose connected to the top of the
exhaust cover allows the constant movement of
water and/or air from the block. Circulated water
flows through the EMM and vapor separator
before exiting through the overboard indicator.
Water Pressure Connection
A fitting and hose for an accessory water pressure
gauge can be connected at the top of the cylinder
block next to the pressure valve housing.
2-Cylinder models
1. Fitting
002478
3-Cylinder models
1. Fitting
002440
1
1
1. Fitting
002461
1