Safety Guidelines
16 DOC-M88-EXX268_V1_12.2016
CAUTION
Extremely hot and cold surfaces from -190°C to 2300°C on internal
components
Risk of severe burns when touching the surfaces.
u Turn off the device and wait until components have cooled down!
u Do not touch the sample holder or internal shieldings before ambient conditions are
reached
Some temperature chambers need liquid Nitrogen (LN
2
) for operation. During handling liq-
uid nitrogen use personnel protective equipment.
CAUTION
Extremely cold surface due to liquid Nitrogen
Risk of severe burns when touching the surfaces.
u Use isolating gloves, closed shoes and protective glasses.
Some temperature chambers are equipped with radiation outlet windows made from beryl-
lium. Do not touch the radiation outlet window.
Fumes or the dust from beryllium and its compounds can be hazardous if inhaled! During
use, corrosion of beryllium may occur. Beryllium must not be cut, machined or handled in
any way.
Disposal of beryllium must comply with all applicable national, state, and local regulations.
To Next Page
Loading...
