EasyManua.ls Logo

Buell 2002 P3 - 1.8 TIRES AND WHEELS

Buell 2002 P3
400 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2002 Buell P3: Maintenance 1-15
HOME
TIRES AND WHEELS 1.8
TIRE INFLATION
Check front and rear tires for proper inflation and inspect
tread for cuts or punctures:
Weekly, and at 1,000 mile (1,600 km) initial service
and at every 2,500 mile (4,000 km) service interval
thereafter.
WHEEL BEARINGS
The wheel bearings are sealed units, no greasing or mainte-
nance is required. Replace when worn. Excessive play or
roughness indicates worn bearings that require replacement.
Check wheel bearings:
Whenever wheel is removed (tire change, fork oil
change).
1-4. Tire Specifications/Pressures
P3 Tires
SOLO
RIDING
LOADED
TO GVWR
Front
Dunlop 100/80 16 50s K330
28 psi
(193 kPa)
32 psi
(220 kPa)
Rear
Dunlop 120/80 16 60s K330
30 psi
(207 kPa)
36 psi
(248 kPa)

Table of Contents

Related product manuals